Industries
Industries we make parts for
Most of what we make disappears inside someone else's machine. The sectors differ; what they ask of a supplier doesn't: the part to the drawing, the paperwork to prove it, and the batch on the day.


Sectors
Where our parts go.
Fluid power and hydraulics
Manifold blocks, valve bodies, cylinder end caps and glands, cross-drilled, deburred and pressure tested.
Automation and robotics
Machine frames, fixtures, grippers, end effectors and guarding, often machined after welding.
Medical devices
Instrument components, housings and test fixtures in stainless, titanium and PEEK. Non-implant work, with full traceability.
Energy and power
Flanges, shafts, bearing housings and fabricated skids for generation, transmission and process plant.
Rail
Brackets, mounting plates, interior fittings and machined castings, with first-article reports to the customer's format.
Food and packaging machinery
Stainless frames, change parts, guarding and hygienic fittings, finished and passivated.
Scientific instruments
Small, tight-tolerance parts in aluminium, brass and engineering plastics, often in low volumes.
Off-highway and agricultural
Pins, bushes, pivots and fabricated brackets in alloy steels, heat treated to specification.
What every sector asks
Whatever the machine, the questions are the same: can you hold it, can you prove it, and will it be here on the day.
Fig. 3.1Measuring section thickness
Regulated work
Paperwork that keeps up.
Where your industry asks for more than a certificate of conformity, we build it into the job: first-article inspection to your format, process control plans, material and treatment certificates, and records kept for as long as you need them.
- First-article inspection reports, to your format
- Material certificates to EN 10204 3.1
- Batch traceability from bar to box
- Records retained to your requirement


