Kestrow Works · 40,000 sq ft
Capabilities
Twenty-two CNC machines, a fabrication shop and an inspection room on one site. Each capability below has its own spec sheet: machines, working envelope, tolerances and materials.


The five
Choose a process for its spec sheet.
- 01KP-MILCNC millingTen machining centres, 3 to 5-axis, for prisms, housings, manifolds and complex 3D forms.±0.005mm on bores, by agreement
- 02KP-TRNCNC turningTurn-mill centres and sliding heads for pins, shafts, sleeves and fittings, bar fed from Ø 0.5 to 65 mm.Ø 0.5mm smallest bar, sliding head
- 03KP-FABFabricationLaser and plasma cutting, CNC folding, and MIG and TIG welding, to frames, guards and machined weldments.4 × 2m largest fabrication
- 04KP-FINFinishingDeburring, grinding and blasting in-house; anodising, plating, coating and heat treatment managed through approved partners.±0.003mm cylindrical grinding
- 05KP-ASMAssemblyFrom bearing fits to finished, tested units: built from our parts and yours, kitted and delivered to your line.100%torque recorded, where specified
At a glance
The whole shop, on one sheet.

| Process | Largest part | Typical tolerance | Batch |
|---|---|---|---|
| CNC milling | 2,000 × 1,000 × 600 mm | ±0.025 mm | 1 to 5,000 |
| CNC turning | Ø 600 × 1,500 mm | ±0.010 mm | 10 to 50,000 |
| Fabrication | 4 × 2 × 2 m | ±1 mm before machining | 1 to 500 |
| Grinding | Ø 300 × 650 mm | ±0.003 mm | 1 to 2,000 |
| Assembly | To bench and crane | To your specification | 1 to 1,000 units |
Design for manufacture
A second pair of eyes on the drawing.
Our engineers read every drawing before we quote. Where a tolerance is tighter than the function needs, a thread is non-standard or a pocket radius is smaller than any cutter, we say so, with the saving, and leave the decision with you.
